Gaziantep University

GAZİANTEP UNIVERSITY

Türkçe
Assoc.Prof.Dr. AHMET ERKLİĞ
HOMEPAGEDEPARTMENT OF MECHANICAL ENGINEERING
Publications
International Journals
Year
Content
2017
Mohamad Alsaadi, Ahmet Erkliğ and Humam Alrawi, Effect of S-glass fabric on the mechanical characteristics of a hybrid carbon/aramid fabric reinforced epoxy composites, Materials Research Express, Doi: 10.1088/2053-1591/aa6bab, 2017
2017
M.Alsaadi, A. Erkliğ, A Comparative Study on Mode I and Mode II Interlaminar Behavior of Borax and SiC Particles Toughened S-Glass Fabric/Epoxy Composite, Arabian Journal for Science and Engineering, doi:10.1007/s13369-017-2649-1
2017
A. Erklig, M. Bulut. Experimental investigation on tensile and charpy impact behavior of Kevlar/S-Glass/Epoxy hybrid composite laminates. Journal of Polymer Engineering, 37(2), 2017.
2017
M. Bulut, A. Erkliğ, M. Alsaadi, S. Kchany. Effects of stacking sequence on mechanical properties of hybrid composites reinforced with carbon, Kevlar and s-glass fibers. Materials Testing. (Accepted)
2017
M. Al-Saadi, A. Erklig, M. Bulut. Mixed-mode I/III fracture toughness of polymer matrix composites toughened with waste particles. Science and Engineering of Composite Materials. (Accepted)
2017
M. Bulut, A. Erkliğ.An experimental investigation on damage characteristics of laminated hybrid composites subjected to low velocity impact. Polymer Composites.DOI: 10.1002/pc.24319, 2017 (Accepted)
2017
Mohamad Alsaadi, Adnan A Ugla, Ahmet Erklig, A comparative study on the interlaminar shear strength of carbon, glass, and Kevlar fabric/epoxy laminates filled with SiC particles, Journal of Composite Materials, DOI: https://doi.org/10.1177/0021998317701559
2017
M. Bulut, A. Erklig, The investigation of quasi-static indentation effect on laminated hybrid composite plates, Mechanics of Material, https://doi.org/10.1016/j.mechmat.2017.11.005
2016
O.Y.Bozkurt, A. Erklig, M. Bulut. Hybridization effects on charpy impact behavior of basalt/aramid fiber reinforced hybrid composite laminates.Polymer Composites, 2016. DOI 10.1002/pc.23957
2016
M. Bulut, A. Erkliğ, E. Yeter. Hybridization effects on quasi-static penetration resistance in fiber reinforced hybrid composite laminates. Composites Part B: Engineering, 2016, Volume 98, 1 August 2016, Pages 9–22. doi:10.1016/j.compositesb.2016.05.025
2016
A. Erklig, M. Al-Saadi, M. Bulut. A comparative study on industrial waste fillers affecting mechanical properties of polymer matrix composites. Materials Research Express, Accepted: 21 June 2016
2015
Bulut M., Erkliğ A., Yeter E. Experimental investigation on influence of Kevlar fiber hybridization on tensile and damping response of Kevlar/Glass/Epoxy resin composite laminates. Journal of Composite Materials, 2015, DOI: 10.1177/0021998315597552
2015
M. Bulut, O.Y.Bozkurt, A. Erklig, "Damping and vibration characteristics of Basalt-Aramid/Epoxy hybrid composite laminates", Journal of Polymer Engineering (ISI), DOI: 10.1515/polyeng-2015-0168, July 2015
2015
E. Yeter, A. Erklig, M. Bulut, "Hybridization Effects on Lateral Buckling Behavior of Laminated Composite Plates", Polymer Composites (ISI), 2015, DOI: 10.1002/pc.23438
2014
A. Erklig, M. Bulut, E. Yeter, "The effect of hybridization and boundary conditions on damping and free vibration of composite plates", Science and Engineering of Composite Materials (ISI), DOI: 10.1515/secm-2014-0070, June 2014
2014
A. Erklig, M. Bulut, E. Yeter, "Natural frequency response of laminated hybrid composite beams with and without cutouts", Journal of Polymer Engineering (ISI), 2014, 34(9),851–857.
2014
E. Yeter, A. Erklig, M. Bulut, "Hybridization Effects on the Buckling Behavior of Laminated Composite Plates", Composite Structures (ISI), DOI: 10.1016/j.compstruct.2014.07.020
2013
A. Erklig, E. Yeter, M. Bulut, "The effects of cut-outs on lateral buckling behavior of laminated composite beams", Composite Structures (ISI) , 54-59 pp., 2013 , DOI: 10.1016/j.compstruct.2013.04.019
2013
A. Erklig, M. Bulut, E. Yeter, "Effects of cutouts on natural frequency of laminated composite plates", Science and Engineering of Composite Materials (ISI) , 179-185 pp., 2013 , DOI: 10.1515/secm-2012-0120
2013
A. Erkliğ, E. Yeter, "On the thermal buckling behavior of laminated hybrid composite plates due to square/circular cut-outs", Mathematical and Computational Applications , 548-557 pp., 2013
2013
A. Erklig, E. Yeter, "The Improvements of the Backhoe-Loader Arms", Modeling and Numerical Simulation of Material Science, 142-148 pp., 2013, DOI: 10.4236/mnsms.2013.34020
2013
B. Kanber, O.Y. Bozkurt, A. Erklig, "Investigation of RPIM Shape Parameter Effects on the Solution Accuracy of 2D Elastoplastic Problems", International Journal for Computational Methods in Engineering Science and Mechanics , 354-366 pp., 2013 , DOI: 10.1080/15502287.2012.756958
2012
A. Erklig, E. Yeter, "The Effects of Cut-outs on Buckling Behavior of Composite Plates", Science and Engineering of Composite Materials (ISI) , 323-330 pp., 2012 , DOI: 10.1515/SECM.2012.0011
2008
A.Cevik, M.A.Kutuk, A Erklig, I.H. Guzelbey, "Neural network modeling of arc spot welding", Journal of Materials Processing Technology (ISI) , 137-144 pp., 2008 , DOI: 10.1016/j.jmatprotec.2007.09.025
2006
İ.H.Guzelbey, A.Cevik, A.Erklig, "Prediction of web crippling strength of cold-formed steel sheetings using neural networks", Journal of Constructional Steel Research (ISI) , 962-973 pp., 2006 , DOI: 10.1016/j.jcsr.2006.01.008
2005
I.H. Guzelbey, B. Kanber, A. Erklig, "Coupling of finite and boundary element methods with incompatible interfaces", Mathematical and Computational Applications , 321-330 pp., 2005
2005
I.H. Guzelbey, A Erklig, "The Efficiency of Direct Integration Methods in Elastic Contact-Impact Problems", Acta Mechanica Sinica (ISI) , 395-401 pp., 2005 , DOI: 10.1007/s10409-005-0048-4
2003
Kanber B, Guzelbey I.H., Erklig A, "Boundary Element Analysis of Contact Problems Using Artificial Boundary Node Approach", Acta Mechanica Sinica (ISI) , 347-354 pp., 2003 , DOI: 10.1007/BF02487812
2003
A. Erklig, E. Yeter, M. Bulut, "The effects of cut-outs on lateral buckling behavior of laminated composite beams", Composite Structures (ISI) , 54-59 pp., 2013 , DOI: 10.1016/j.compstruct.2013.04.019
Communications Presented and Published In a Book In The International Scientific Meetings
Year
Content
2016
Journal / Book Name: 2nd International Conference on Engineering and Natural Sciences (ICENS 2016)
Authors: Ahmet Erklig, Mehmet Bulut, Yousif Jaber AL-Ani, M.Akif Kütük
The Effect of Borax Particles on Bonding and Tensile Strength of Adhesively Bonded Double Lap Joints
2016
Journal / Book Name: International Conference on Welding Technologies and Exhibition (ICWET'16)
Authors: A. Erklig, M. Bulut
Tek tesirli yapıştırma bağlantılarında epoksi yapıştırıcı içerisindeki mikro boyuttaki perlitin hasar yüküne etkileri
2016
Journal / Book Name: .International conference on Structural Engineering, New Technology and Methods
Authors: Ahmet Erklig, Mehmet Bulut
(ICSENM'16), The Influence of Borax Filler Addition on Damping and Vibration Response of S-glass/epoxy Composite Laminates
2016
Journal / Book Name: International Conference on Advanced Technology & Sciences (ICAT’16)
Authors: A. Erkliğ, A. Jabbar, M. Alsaadi
Tensile and flexural behavior of nano-silica modified carbon/Kevlar hybrid composites
2016
Journal / Book Name: International Conference on Advanced Technology & Sciences (ICAT’16)
Authors: A. Erkliğ, M. Bulut
The Influence of Micro-Scale Perlite Inclusion within the Adhesive Epoxy Resin on Tensile Behavior of Glass-Epoxy Laminates Adhesively Bonded Single-Strap Repairs
2016
Journal / Book Name: International Conference on Advanced Technology & Sciences (ICAT’16)
Authors: A. Erkliğ, A. Shihan, M. Alsaadi
Effect of Olive Pomace on the Mechanical Property of Glass Fiber Reinforced Epoxy Composites
2016
Journal / Book Name: 1st International Mediterranean Science and Engineering Congress (IMSEC 2016)
Authors: M. Alsaadi, A. Erkliğ
A study on perlite particles affecting mechanical properties of glass fabric/epoxy composites
2016
Journal / Book Name: International Energy and Engineering Conference (UEMK 2016)
Authors: M. Alsaadi, A. Erkliğ
A comparative study on sewage sludge ash affecting mechanical properties of glass fabric/epoxy composites
2015
Journal / Book Name: METECH 2015
Authors: M.Alsaadi, A.Erkliğ
Mechanical Properties and Mixed-Mode Fracture Toughness (I+III) of Silica Nanoparticles Reinforced Polymer Composites
2014
Journal / Book Name: IECMSA-2014
No/Edition: 2014
Authors: A.Erklig, M.A. Kutuk
Shape and position effects of double holes on buckling of composite beams
2012
Journal / Book Name: 2nd international conference on computation for science and technology
No/Edition: OP-57/123 pp
Authors: M. Bulut, A. Erkliğ
Free Vibration of Composite Plates With Cut-outs
2000
Journal / Book Name: Proceedings of Ninth International ANSYS Conference and Exhibition
Authors: I.H.Guzelbey , A. Erklig, M. Ozakca
Finite Element Analysis and Optimization of A Soldier Boot Sole Under Static Load
National Journals
Year
Content
Authors:
A. Erklig, I.H. Guzelbey, A. Cevik, "Finite Element Analysis of Finite Strain Elastoplastic Contact-Impact Problems", Gazi University Journal of Science , 327-328 pp., 2010
Communications Presented and Published In a Book In The National Scientific Meetings
Year
Content
Authors:
  1. A. Erklig, M. Bulut, E. Yeter, The 2nd International Conference on Computation for Science and Technology konferansı dahilinde "-" bildiri kitapçığındaki "Free vibration of composite plates with cutouts", - pp., Niğde, Türkiye, Temmuz 2012
  2. İ.H.Güzelbey, A.Erkliğ, M.Özakça, 11. Ulusal Mekanik Kongresi konferansı dahilinde "11.Ulusal Mekanik Kongresi Bildiriler Kitabı" bildiri kitapçığındaki "Bir Bot Tabanının Sonlu Elemanlar Metodu İle Modellenmesi, Analizi ve Optimizasyonu", 371-378 pp., Bolu, Türkiye, Eylül 1999
  3. İ.H. Güzelbey, N.Atmaca, A.Erklig, 13. Ulusal Mekanik Kongresi konferansı dahilinde "13. Ulusal Mekanik Kongresi Bildiri Kitabı" bildiri kitapçığındaki "Serbest Ucundan Tekil Yüke Maruz Bir Kirişin Elasto-plastik Çözümü", 891-895 pp., Gaziantep, Türkiye, Eylül 2003
  4. İ.H. Güzelbey, A. Erklig, 14. Ulusal Mekanik Kongresi konferansı dahilinde "14. Ulusal Mekanik Kongresi Bildiriler Kitabı" bildiri kitapçığındaki "Bir Bot Tabanının Sonlu Eleman Yöntemi İle Statik ve Dinamik Analizi", 863-868 pp., Hatay, Türkiye, Eylül 2005
  5. İ.H. Güzelbey, A. Erklig, 14. Ulusal Mekanik Kongresi konferansı dahilinde "14. Ulusal Mekanik Kongresi Bildiriler Kitabı" bildiri kitapçığındaki "Elastik Temas-Darbe Problemlerinin Sonlu Eleman Analizi", 869-877 pp., Hatay, Türkiye, Eylül 2005
  6. E. Sönmez , M.A. Kütük , A. Erkliğ, 3. Otomotiv Teknolojileri Kongresi konferansı dahilinde "3. Otomotiv Teknolojileri Kongresi" bildiri kitapçığındaki "A Review: Lightweigth Material Applications in Automotive Industry", 283-290 pp., Bursa, Türkiye, Haziran 2006
  7. A. Erklig, I.H. Güzelbey, 15. Ulusal Mekanik Kongresi konferansı dahilinde "15. Ulusal Mekanik Kongresi Bildiriler Kitabı" bildiri kitapçığındaki "Zaman İntegrasyon Metodlarının Dinamik Kompozit Problemlere Uygulanması", 817-822 pp., Isparta, Türkiye, Eylül 2007
  8. A. Erklig, M.A.Kütük., S.K. Bayer, 4. Otomotiv Teknelojileri Kongresi konferansı dahilinde "4. Otomotiv Teknelojileri Kongresi" bildiri kitapçığındaki "Mahruti Dişlisinin Diş Dibi Gerilim Analizi", 210-214 pp., Bursa, Türkiye, Eylül 2008
  9. A.Erklig, N.Atmaca, I.H.Güzelbey, 16. Ulusal Mekanik Kongresi konferansı dahilinde "16. Ulusal Mekanik Kongresi" bildiri kitapçığındaki "Ağsız Radyal Noktasal İnterpolasyon Yönetiminin İki Boyutlu Elastik Probleme Uygulanması", 22-26 pp., Kayseri, Türkiye, Haziran 2009
  10. A. Erklig, E. Yeter, M. Gülbay, 5. Otomotiv Teknolojileri Kongresi konferansı dahilinde "5. Otomotiv Teknolojileri Kongresi" bildiri kitapçığındaki "Finite Element Analysis of Backhoe-Loader Front Arm", 445-452 pp., Bursa, Türkiye, Haziran 2010
  11. A. Erklig, E. Yeter, 17. Ulusal Mekanik Kongresi konferansı dahilinde "17. Ulusal Mekanik Kongresi" bildiri kitapçığındaki "Kompozit Malzemelere Açılan Dairesel, Kare, Üçgen Ve Eliptik Kesitlerin Burkulmaya Etkisinin Sonlu Eleman Yöntemiyle Araştırılması", - pp., Elazığ, Türkiye, Eylül 2011
Design ~GAÜN WebTeam